Document Type : Original Article

Authors

1 Msc. Student, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture, Shahid Chamran University, Ahvaz, Iran

2 Associate Professor, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture, Shahid Chamran University, Ahvaz, Iran

3 Assistant Professor, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture, Shahid Chamran University, Ahvaz, Iran

Abstract

Objective: Potato is the fourth important food crop after wheat, rice and maize. Shrinkage  of  food  materials  has  a negative  consequence  on  the  quality  of  the dehydrated product. The main objective pursued in this paper is to investigate the shrinkage amount of potato slices during drying process using vacuum-infrared method. Methods: In this work, the effect of the infrared radiation powers (100, 150 and 200 Watt) and absolute pressure levels (20, 80, 140, 760 mmHg) at different thickness (1, 2 and 3 mm) on bulk volumetric shrinkage were investigated. Results: Data analysis showed that shrinkage percentage decreased with decrease of sample thickness and increase of infrared power. It was found that either thickness or infrared power had any significant effects (P < 0.01) on shrinkage of potato slices in this drying system. The regression model is a three-variable linear that Coefficient of determination is 0.532 and implies that the model can explain 53.2 % of the volume ratio changes

Keywords

Aguilera, J.M. (2003). Drying and dried products under the microscope. International Journal of Food Science and Technology, 9 (3): 137ñ143.
AOAC. (1990). Official Methods of Analysis. No. 934-06. Association of Official Chemists, Washington, DC. Hatamipour, M.S. & Mowla, D. (2002). Shrinkage of carrots during drying in an inert medium fluidized bed. Journal of Food Engineering, 55: 247ñ252.
Hernandez, J.A., Pavon, G., Garcia, M.A. (2000). Analytical solution of mass transfer equation considering shrinkage for modeling food drying kinetics. Journal of Food Engineering, 45: 1ñ10.
Koc, B., Eren I. & Ertekin, F. K. (2008). Modelling bulk density, porosity and shrinkage of quince during drying: The effect of drying method. Journal of Food Engineering, 85 (3): 340-349.
Marwaha, R.S., Dinesh, K. & Singh, S.V. (1999). Chipping and nutritional qualities of Indian and exotic Potato processing varieties stored under different conditions, Journal of Food Science and Technology, 46: 354-358.
Mayor, L. & Sereno, A. M. (2004). Modelling shrinkage during convective drying of food materials: a review. J. Food Eng, 61: 373-386.
Mohsenin N. N. (1986). Physical properties of plant and animal materials. New York: Gordon and Breach Sci. 
Motevali, A., Minaei, S. and Khoshtagaza, M.H. (2011). Evaluation of energy consumption in different drying methods. Energy Conversion and Management, 52 (2): 1192ñ1199.
Park, K.J. (1998). Diffusion model with and without shrinkage during salted fish muscle drying. Drying Technology, 16 (5): 889ñ905.
Yan, Z., Sousa-Gallagher, J.M. & Oliveira, A.R.F. (2007). Shrinkage and porosity of banana, pineapple and mango slices during air-drying. Journal of Food Engineering, 83(3): 430ñ440.